Plumbing for bathroom involves a considerable amount of work because they have many different plumbing connect. When building a new home, or installing a new bathroom, plumbing and bathroom design will take a little time. Some standard learning toilet pipes accelerate the process and guide you through a more successful project.
One of the trickiest parts of toilet plumbing is the drain, which is always fixed to the floor and consists of a 3 or 4 inch wide pipe that leads to the main drain line of your home. Normally, the PVC pipe is used for the toilet drain and is routed directly to the main drain of the house, which is also a PVC pipe of 4 inches or more in diameter. The toilet drain pipe runs to the floor, directly below the toilet, which is connected to a flange installed in the floor. The toilet is mounted to the flange with a pair of mounting bolts.
Connect the toilet drain
The difficulty in the pipes for the drainage of a toilet is to make the connection to the main line of the house. If the toilet is on the first floor of the slab, this involves digging and digging and is well out of the reach of the average do-it-yourself enthusiast. On a second floor or first floor above a basement, the connection is made under the floor in the floor beams. The 4-inch pipe is directed to the main line of the house, typically using a folding cabinet closure, which is a 90-degree bend on a slope of at least 1/8 of an inch per foot. Vented drain vent with a vertical section of the pipe in the main drainage basin.
The other side of the toilet plumbing is the toilet power line, which carries the water directly into the toilet tank. Without a power line, the toilet is discharged but not filled with water. Toilet bowl lines consist of a cold, single water pipe run from the main water line of the house to the wall behind the toilet a few inches from the floor. A shut-off valve is installed at the end of the supply pipe and a hose runs the rest of the way to the toilet tank.
Types of pipe
Nowadays, different types of pipe are used for plumbing toilets, including plastic, PVC and copper pipe. Since all supply lines in homes today are usually copper tube and 1/2 inch in diameter, this is the most common type of tubing for the toilet supply. Almost all drainage pipes are PVC because of their resistance to corrosion, resistance and price. If you need to connect PVC to copper or metal piping, special fittings to make the connection are available from plumbing supply stores.